Aquatica Digital AD40x Manuel d'instructions télécharger pdf (Page 11)

MOUNTING AND ATTACHING FLASHES

Depending on which strobe system you are using, you can mount the necessary shoes or brackets or Base Ball

onto the threaded holes on the top of the hand grips. Use of the Aquatica TLC Strobe Arm System is recommended.

There are also a 1/4”-20 threaded hole on the bottom of the housing that can be used for various mounting appli-

cations. For example, another 1/4”-20 threaded hole on top of the front half of the housing will accept an Aquatica

Base Ball that can hold a small dive light or a strobe arm.

The AQUATICA Digital housing is comes with a standard single strobe connector, to this a second bulkhead con-

nector for strobes can be added or the original one can be replaced with a Ikelite type bulkhead connector.

• When inserting the sync cord(s) be sure to lubricate the O-ring on the sync cord’s connector with

a light coat of O-ring grease. Also put a light coat of O-ring grease on the threads of this connector.

TAKING A PICTURE

Following are the basic techniques. For more information and advanced photography please study the original

camera instruction manual.

1. Selelection of the exposure Mode (key # 16) is achieved by rotating the knob to the desired exposure mode,

usable exposure mode options are: Programmed Auto (P), Shutter Priority Auto (S), Aperture Priority Auto (A) or

Manual Exposure (M).

2. Control of Auto Exposure compensation (key# 2) is achieved by rotating the knob and positionning over the

button to engage compensation function, select proper factor by rotating command knob (key# 18) .

Note: When using a ash, it is reccomended that the camera be used only in Single Frame Motor Drive or there

is the possibillity that the camera will re before the ash can recycle.

3. Pull the Shutter Release Lever partially back. This will activate the camera’s meter and autofocus system.

4. If using manual focus use the Focus Knob (key # 9) on the housing or on the at port to focus.

5. If using the Manual, Aperture or Shutter priority mode adjust the Command Knob (key # 18) and/or

aperture/compensation knob (key # 2) to set the shutter speed and/or aperture.

6. Pull the Shutter Release Lever (key # 1) the rest of the way until the camera res.

1 2 ... 6 7 8 9 10 11 12 13 14 15

Pas de commentaire

Aquatica Digital AD40x Manuel d'instructions Page 11