Aquatica Digital 20058 Manuel d'instructions télécharger pdf (Page 5)

CONTROLS IN DETAIL, CONTINUED

28. REMOVABLE VIEWFINDER: A full view of the illuminated camera viewnder displays all necessary information. This viewnder can be

removed and replaced with the optional Aqua View Finder (# 20054) for a larger displayed image.

29. REAR LCD WINDOW: allow viewing of menus, information and images.

30. MOISTURE ALARM WARNING DIODE: Warning LED will light up in the unlikely event of water penetrating the housing.

31. IMAGE QUALITY/SIZE & RESET BUTTON: Press to access the different image quality available on the camera; use in conjunction with main

and/or sub command dial control knobs. Pressing this button and the Exposure compensation (#39) lever will reset the camera shooting

parameter to its default position (see shooting tip # 5).

32. ISO CONTROL BUTTON: Press to select ISO, use in conjunction with subcommand dial control (Key #3) to select value (see shooting tip # 5).

33. WHITE BALANCE: Press to access white balance functions, use in conjunction with subcommand dial (Key #3) to select mode and/or main

dial controls (Key # 2) to the select attributes of the selected mode. Or to safely lock a picture in playback mode (see shooting tip # 5).

34. MENU BUTTON: Press to activate menu display, scroll using multiple selector buttons and select using OK button.

35. DELETE BUTTON: Press to delete images, use multiple selector buttons to select and press the enter button to delete, can also be used in

conjunction with the metering selector button (Key #22) in order to format the card inside the camera.

36. PLAYBACK BUTTON: Press to activate the monitor and review images. Use Multi Selector to scroll, select and magnify.

37. RELEASE MODE DIAL SELECTOR UNLOCK BUTTON: This button unlock the release mode dial so it can be rotated, with the release mode

dial knob (key #7)

38. AE / AF LOCK LEVER: Lock the auto focus / auto exposure or use for activating the AF-ON button according to preference

(see shooting tip # 2).

39. EXPOSURE COMPENSATION BUTTON: Press to engage the Exposure compensation control [+/-]. Rotate the Main-Command knob to set

the desired exposure compensation value. The value will appear on the rear LCD panel and in the Viewnder. This button when pressed

along with QUAL (key # 31) button will reset the camera shooting parameter to its default position (see shooting tip # 5).

40. HAND GRIPS (X2): Left and right grip allowing the mounting of strobe arms and accessories.

41. GRIP’S ACCESSORIES MOUNTING HOLES: Two 1/4-20 TPI holes on each grip are ready to accept TLC Base Brackets or TLC Base Ball

for strobe arms or accessories.

42. TOP MOUNTING HOLE FOR ACCESSORY: a 1/4”-20 TPI hole is supplied to accept a TLC accessory or TLC base ball for mounting a strobe

arm or a modeling light.

43. BOTTOM MOUNTING HOLES: Three 1/4” X 20 holes are provided for mounting strobes trays or accessories.

44. SACRIFICIAL ANODE: A zinc anodes is installed to protect your housing against salt water corrosion; it is made to deteriorate faster than the

other strategic metal part of your housing, hence the name sacricial anodes. This anode need to be replaced by the user as needed.

45. RUBBER ANTI SKID PADS: rubber pads are provided to protect the housing and preventing it from sliding on wet decks.

46. LOCKING LATCHES: Two heavy duty latches (one per side) with safety locks to protect against accidental opening.

47. SAFETY LOCKING TAB: Push safety tab and lift latches to open.

page 4

1 2 3 4 5 6 7 8 9 10 ... 14 15

Pas de commentaire

Aquatica Digital 20058 Manuel d'instructions Page 5