Aquatica Digital 20058 Manuel d'instructions télécharger pdf (Page 6)

1- SHUTTER RELEASE LEVER: Pulling the shutter release lever

back part way activates the camera meter and auto focus. Pulling

the lever back all the way res the camera.

2- SUB-COMMAND INPUT / APERTURE KNOB: Rotates clockwise

and counterclockwise. Use alone or in combination with other controls

to select or set various camera functions or modes. In “Manual” the

exposure mode controls the aperture settings (see shooting tip).

3- MAIN-COMMAND INPUT KNOB: It rotates clockwise and coun-

terclockwise. It can be used alone or in combination with other con-

trols to select or set various camera functions or modes. Refer to

camera manual for in depth use (see shooting tip #3 & #4).

4- MOVIE RECORD BUTTON ACTUATING LEVER: Pull to start

recording video, pull again to stop, works in conjunction with Live

View mode selector (key #36).

5- (DoF) Depth Of Field & (FN) Function toggle lever: Toggles to

engages these buttons, these camera buttons are highly customizable

for both still and video features.

6- POWER SWITCH KNOB: Rotate to switch camera on or off.

7- TOP BULKHEAD ACCESS HOLE: A standard ½” plugged hole

for receiving accessories such as a remote cord or other wired

accessory.

8- INTERNAL FLASH LOWERING LEVER: Push to close internal

ash of the camera, used with either –OPT or –HYB type of housing

9- OPTICAL STROBE CONNECTOR: For connecting optical cord

from strobe (Sea & Sea type shown, other option available, see

strobe connectors section for more details).

10- OPTICAL STROBE CONNECTOR: For connecting optical cord

from strobe (Inon type shown, other option available, see strobe

connectors section for more detail).

11- FLASH MODE & EXPOSURE COMPENSATION LEVER:

Press to engage the flash exposure compensation or flash

synchronization mode, use main or sub command knob to select

options. (see also shooting tips)

12- INTERNAL FLASH UP BUTTON: push to get the internal ash

of the camera in up position (used with –HYB and -OPT type of

housing

13- FOCUS/ZOOM PINION GEAR RELEASE DISC: A release

disk is provided to disengage the knob should you want to us a non

AF-S lens in autofocus or when you wish to remove the camera,

with lens attached, from the housing.

14- FOCUS/ZOOM KNOB: Turning allows manual focus of a single

focus lens or rotation of the zoom mechanism of a lens.

15- FOCUS/ZOOM PINION GEAR: Engages and operates the

focus or zoom gear attached to the lens.

16- LENS RELEASE LEVER: activates the lens release button on

the camera allowing easy removal of the lens.

17- LENS RELEASE INTERNAL KNOB LEVER: Applies pressure

on the camera lens lock button

18- AF/M SELECTOR KNOB: rotate to select between auto or

manual focus

19- FOCUS MODE SELECTOR FORK: Engages the focus AF/M

selector of the camera.

20- FOCUS MODE SELECTOR BUTTON: Press to select between

AF-A, AF-C and AF-S or for 3D, Auto, single or multiple point

focusing. Use main command or sub command knob to choose

options.

21- FOCUS MODE SELECTOR ACTUATOR: Presses on the AF

Mode button of the camera.

22- HAND GRIPS (X2): Left and right grip allowing the mounting of

strobe arms and accessories.

23- FRONT BULKHEAD ACCESS HOLE: Standard ½” hole for

mounting accessories such as optional Hydrophone (shown) or

other wired accessories.

24- CAMERA MOUNTING SCREW: Used to attach camera to

quick release tray.

25- REMOVABLE CAMERA TRAY: Holds camera in place and

slide in housing, allowing easy battery replacement.

26- BAYONNET MOUNTING FLANGE: Allows the mounting of

different ports and extension rings on the housing.

27- PORT RELEASE MECHANISM LEVER: pull to release the

locking mechanism when installing or removing a port or extension.

28- METERING PATTERN SELECTOR KNOB: Push to select

the metering mode by rotating the main command dial (key #3),

options are: Spot, Center Weighted or Matrix metering (see also

shooting tips #5).

29- AE-L/AF-L & AF-ON LEVER ROTATING COLLAR: Pull out

the AE-L/AF-L Lever and rotate this collar to position it in the

desired mode.

30- AE / AF & AF-ON LOCK LEVER: Lock the auto focus / auto

exposure or use for activating the AF-ON button according to

preference

31- EXPOSURE COMPENSATION BUTTON ACCESS LEVER:

Pull to engage the Exposure compensation control [+/-]. Rotate

the Main-Command knob to set the desired exposure compensa-

tion value. The value will appear on the rear LCD panel and in

the Viewnder. This button when pressed along with QUAL (key #

50) button will reset the camera shooting parameter to its default

position.

Page 4

CONTROLS IN DETAIL

1 2 3 4 5 6 7 8 9 10 11 ... 17 18

Commentaires sur ces manuels

Pas de commentaire

Aquatica Digital 20058 Manuel d'instructions Page 6

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires pour appareils photo Aquatica Digital 20058